| GemCad Ray Traces for RI = 1.70 | ||
 |
||
| Random Model | Cosine Model | ISO Model |
| K12 Oval 1.45
Designed by Fred Van Sant 1997 Rendered by Bob Keller |
|
| Angles for R.I. = 1.70+ | 49 facets + 12 facets on girdle = 61 |
| 2-fold, mirror-image symmetry | 96 index |
| L/W = 1.45 Table Area= 30.3% T/W = 0.5511 C/W = 0.1708 | P/W = 0.6088 H/W = 0.7995 g2/W = .311423 |
| VF = .413306 GVF = .005385 | Brightness at 0 degrees tilt for RI = 1.70
COS = 72.2 ISO = 84.3 |
| Pavilion | |||
|---|---|---|---|
| 1 | 41.00 | 20-28-68-76 | Cut to equal depth - make PCP (culet) |
| 2 | 41.00 | 12-36-60-84 | Meet culet |
| 3 | 41.00 | 4-44-52-92 | Meet culet |
| g1 | 90.00 | 18-30-66-78 | Cut to equal depth, set size |
| 4 | 48.00 | 18-30-66-78 | Meet g1.1.1.g1 |
| 5 | 62.05 | 9-39-57-87 | Meet 2.1.4 |
| 6 | 70.41 | 03-45-51-93 | Meet 3.2.5 |
| g2 | 90.00 | 9-39-57-87 | Meet 5.4.g1 |
| g3 | 90.00 | 03-45-51-93 | Meet 6.5.g2 |
| Crown | |||
| 1 | 44.48 | 03-45-51-93 | Match g3, establish upper girdle line |
| 2 | 42.66 | 9-39-57-87 | Meet g2.g3.1 |
| 3 | 45.75 | 18-30-66-78 | Meet g1.g2.2 |
| 4 | 34.00 | 06-42-54-90 | Meet g3.1.2.g2 |
| 5 | 34.00 | 24-72 | Meet 3.2.4, g1.3.3.g1 |
| 6 | 24.00 | 06-42-54-90 | Meet 4.1.1.4, 4.2.3.5 |
| 7 | 24.00 | 24-72 | Meet 6.4.2.3.5 |
| T | 0.00 | Table | Table Width / Width = .5511 |
There are two ways to make the K12 Oval shape.
- At 90° cut the side and end pairs to make L/W. Then cut the other four girdles at 90° to achieve g2/W by measurement.
- Breakpoint Method:
a. Cut pavilion set 1, 2 & 3 to PCP.
b. Cut four facets at 90°, end indices, to size stone.
c. Chain-cut break facets, starting as shown, to meetpoints as you go.
d. Chain-cut girdles at 90°, starting next to the ends, to make a level girdle line.
