Message Index Start New Topic Photo Gallery FAQ and Use Tips Bob's Rock Shop

Posted in response to Information regarding Norris & Mollin from Brandon Garrels on June 19, 2013 at 22:12:50:

Re: Information regarding Norris & Mollin

Hi Brandon,

There may well be some Taylor users or collectors on the United States Faceters Guild Faceters List who can help you with documentation for your machine:

http://www.usfacetersguild.org/faceters_list.shtml

You should be able to use at least some third party transfer blocks, although if the Taylor employed keyed dops you may have to do non-keyed transfers with them. I like my Polymetric transfer block:

http://www.polymetricinc.com/accessories.htm

Depending on the dop shank size used by Taylor and the Taylor's quill arrangement, you may also be able to adapt a different manufacturer's 45 degree dop.

There is most likely someone on the USFG Faceter's List who can help you with specifics on these questions. Join us on the USFG list!

From Bob Keller - July 05, 2013 at 00:41:56

Message: 70748



Message Reply Form

Use the form below to post a reply to the Re: Information regarding Norris & Mollin message. If you haven't read the Rock Net FAQ and User Tips yet, now would be a good time to do so.

Your Name: (Required)
E-Mail Address: (Optional)
Subject: Re: Re: Information regarding Norris & Mollin
Reply Message: (Required)
Last chance to check your message for typos!

Message Index Start New Topic Photo Gallery FAQ and Use Tips Bob's Rock Shop

RockTumbler.com - The Internet's Leading Rock Tumbler Source and Tumbling How-to Resource

Bob Keller