| Message Index | Start New Topic | Photo Gallery | FAQ and Use Tips | Bob's Rock Shop |
|
I have been trying to facet my first Portugese in CZ. Cut to the chase... How do I calculate the required rough size using the dimensions (H/W = (P+C)/W=0.02= 0.827 P/H=0.707 C/H=0.268 from the design? Other dimensions are L/W=1.00 T/W=0.434 T/L=0.434 P/W=0.585 C/W=0.222 My rough is 13.5mm thick, 12.3mm wide and 14.4mm long. When I was young, I enjoyed crunching the numbers but now... I just can't figure out how to plug in the numbers. A little help is requested, if you please...
From Albert McBee - December 24, 2009 at 09:13:32
|
Message Reply Form
Use the form below to post a reply to the faceting calculations message. If you haven't read the Rock Net FAQ and User Tips yet, now would be a good time to do so.
| Message Index | Start New Topic | Photo Gallery | FAQ and Use Tips | Bob's Rock Shop |
 |
 |