| Message Index | Start New Topic | Photo Gallery | FAQ and Use Tips | Bob's Rock Shop |
Posted in response to Re: Faceting problem from Bob Keller on October 08, 2008 at 12:14:03:
|
Hi Bob, thanks for the reply. I did not have any problem with the other 2. I thought that I had the cut down pretty good too. So much for confidence. As I was cutting C6 @ 25 degrees at index 22-26 and so on to index 66 it started to go cut deeper to the girdle. So I re-counted the facets thinking I missed or over cut a facet. I have not removed the stone ftom the quill and it is tight in the quill. I re-cut fron 22 to 66 again with a 1200 steel lap to re-gain some room and I am still off.
From Chuck Blalock - October 10, 2008 at 18:24:41
|
Message Reply Form
Use the form below to post a reply to the Re: Re: Faceting problem message. If you haven't read the Rock Net FAQ and User Tips yet, now would be a good time to do so.
| Message Index | Start New Topic | Photo Gallery | FAQ and Use Tips | Bob's Rock Shop |
 |
|